Top Menu

Reinstall stock Android firmware for Galaxy Tab S2 (SM-T710)

Flashing the stock Android firmware on your Galaxy Tab S2 is quite easy. There are two things you need to know before installing the stock firmware.

  1. Firmware for Galaxy Tab S2
  2. Odin

The two sites below is what I use to download stock firmware:

https://www.sammobile.com/firmwares/galaxy-tab-s2/SM-T710/

https://samsung-firmware.org/model/SM-T710/

Both sites require you to register before downloading. If you don’t want to register and pay the premium for downloads, just google the stock firmware name that you are looking for and you will find other sites where you can download for free and without the need to register.

You can download and install Odin from here.

Install Stock Firmware on Samsung Galaxy Tab S2:

  1. Download the firmware for your Samsung Galaxy Tab S2
  2. Switch off your device
  3. Switch on your device and boot it into Download mode by pressing the Volume Down + Home + Power buttons simultaneously
  4. Run Odin from your computer
  5. Connect your Samsung Galaxy Tab S2 device to the computer
  6. When you connect the device to your computer, the ID: COM port on Odin will turn Blue. You’ll also see“Added!!” message to indicate a successful connection
  7. Tap the AP button in ODIN;
  8. Select the firmware that you have downloaded
  9. In the Options section, make sure that only the Auto Reboot and F. Reset Time boxes are checked (do not check the Re-Partition box);
  10. Press the Start button to initiate the flashing procedure. Your device will automatically reboot.
  11. That’s it! You have successfully reinstall your Galaxy Samsung Tab S2  with an Android stock firmware.

 

, , , , , ,